Bell & Gossett ​E-1510 PUMPS- EFFECTIVE & EFFICIENT

Bell & Gossett E-1510 PUMPS- EFFECTIVE & EFFICIENT

The accomplished line of the Bell & Gossett e-1510 centrifugal pumps, which were earlier known as 1510 pumps has become predominantly popular. These have been specifically designed to provide effectiveness and efficiency in the end suction market for HVAC and plumbing usages. These pumps are highly resourceful and competent. Comparing the efficiency of e-1510 pumps with the other pumps in the market, it has been determined that e-1510 pumps definitely reduces the consumption of electricity, they advances and expands the overall performance of the system and also minimizes the life cycle costs.

The latest efficient development permits its users to develop and maintain their levels of proficiency by effectively using the machine in any prevalent condition. This series of e-1510 is an amalgamation of many qualities. Its efficiency is a combined effort of computational fluid dynamics (CFD) design technology, expertise in deep hydraulic engineering and Xylem’s vast and widespread knowledge of HVAC and plumbing applications. The series e-1510 is available in nearly twenty six sizes. It is also available in an assortment of various configuration options that permits the users to choose depending on the factors of customization and adaptability.

SPECIFICATIONS OF e-1510 END SUCTION PUMPS

These pumps are base mounted with an end suction design which allows removal and abolition services of the entire rotating assembly without creating any disruption to the pump piping, electrical motor connections and also pump to motor alignment. The baseplate of the pump is made up of structural or fabricated steel with sides fully enclosed and welded. The plastering or rendering area should be fully open. The combination of the pump and motor baseplate should be stiffly in compliance with each other thereby by reducing the vulnerability of the vibrations that happens during the process. The stiffness of the baseplate shall adhere to the guidelines of ANSI/ HI 1.3.8.2.1-2009 for horizontal baseplate design standards. The motor of the pump also meets NEMA and EISA 2007 specifications. They shall be of the size, voltage and arena mentioned in the plan.

The pump and the motor should be in complete alignment. They should be rearranged or readjusted after the installation by the contractor as per the factory requirements or guidelines. The pumpsare produced, amalgamated and are put to test in an ISO 9001 approved facility. There is a pump monitoring system provided on the pump to measure the pump’s vibration in a continuous manner and also for monitoring the temperature. The vibration modes are catered to ANSI/HI 9.6.4-2009 and ISO 101816 recommended levels. A battery powered system is inculcated with no powered borrowed from any outside source. The permissible temperature should range between minus 40 degree Celsius to 100 degree Celsius. And lastly the pumps should definitely be in the series of Bell & Gossett e-1510.

CHARACTERISTICS & USES

Following are the benefits and uses of using the above mentioned series of pumps-
1. It has got a heavy duty and a rugged baseplate.
2. Internal self-flushing mechanical seal is available.
3. Supplementary back-out is available.
4. Computerised way of controlling Impeller balancing.
5. Hard and concrete full mounted volute.
6. Adheres to the ANSI standards that are influential and renowned.
7. Central drop out spacer coupling is available.

For building and operating an efficient water system, we require the right product or the inventory as well as the right technicians and experts to carry the application with ease and effectiveness. For that the Bell & Gossett series e-1510 is apt and considerable for the use. For any assistance and guidance, you can contact us on the provided number and can also email us with queries or help if needed.