Shipco
503DS Shipco Steel Condensate Pump 81 Gal With 3 HP
- MPN:
- 503ds
- Condition:
- New
- Availability:
- Please Contact Us For Lead Time!
- Shipping:
- $625.00 (Fixed Shipping Cost)
Description
503DS Shipco Steel Condensate Pump 81 Gal With 3 HP. *Please note image is generic.
Information:
- Shipco Type DS Condensate Technical Pump Brochure
- Shipco Type DS/DC Condensate Pump Installation Manual
The Durable Line of Condensate Handling Equipment is constructed with Steel Receivers that provide years of service even with the most aggressive waters.
- Receivers available from 15 gallon to 235 gallon capacity.
- Centrifugal Pumps designed for many years of dependable service with low maintenance.
- Pumps are bronze fitted to resist corrosion and prevent seizing.
- Bronze Impellers are cast one piece construction trimmed and balanced to design capacities.
- Pump has no internal bearings. (Motor bearings refer to motor manufacturer’s instructions.)
- Units are available in most popular voltages.
- Control panels (optional) are available and can be factory mounted and wired to NEMA and J.I.C. specifications.
Please Contact Us For Lead Time!
Warranty Information
Warranty: Quoted prices include standard factory warranties. Warranty requires install, start-up and operation as per the manufacturers IOM.
Job Site Assistance: By Others
Start-Up: By Others
Commissioning: By Others: These services, if a project requires start up, they are responsibility of contractor or commissioning agent. Owner training assistance, as outlined in any equipment specifications the responsible of the commissioning agent.
Clarifications & Exclusions
'ALTERNATES' are offered for consideration and will always be subject to the engineer's and owners approval. Excludes any seismic calculations or supports, coatings other than factory standard.
Terms: prices are quoted are "each" (unless stated otherwise) and FOB point of origin with no freight allowed freight ships via common ground carrier, and inside continental US Only - any special shipping requirements to be responsibility of purchaser. We offer all prices less tax, with a validity of 30 days from the date quoted and all sales are final. Once items have shipped and left the warehouse National Pump Supply is not responsible for any damage caused during the shipping process. You must contact the shipper directly and file a claim with the shipping company.
Lead Time: All prices offered are based on standard factory lead times (or) as stated within quotation. Expedited shipments may be available at an additional charge. Contact your Sales Engineer for the ETA of any specific equipment on any order or quotation.
View AllClose
Additional Information
Brand: |
Shipco |
Model: |
503DS |
Material: |
Steel |
Discharge Pressure: |
30 psi |
Horse Power: |
3 HP |
Connection Size: |
2" |
Minimum GPM: |
75 GPM |
Phase: |
Three |
RPM: |
3450 RPM |
Connection: |
Threaded |
Max Temp: |
225*F |
Tank Size: |
75 Gallon |
Pump Type: |
Condensate |
Voltage: |
208-230/460v |
1 Review
-
Thanks again, National Pump Supply!
Had to replace the entire condensate pump unit,.and actually got this in just a few days! I was expecting weeks. arrived in good shape, too. When I'm in Seattle, I owe you a lunch or something!