110223-349 Armstrong Astro 250SS-LC Stainless Steel Pump W/ Line Cord

110223-349 Armstrong Astro 250SS-LC Stainless Steel Pump W/ Line Cord with 2 bolt flange connection. Comes with 6 ft line cord. *Astro 2 HWR Systems (for dedicated return - 3 pipe installation). The Armstrong Astro 2 hot water re-circulation system automatically circulates water through domestic water pipes. This ensures that hot water is available instantly at every tap throughout a residence. From a cost and environmental point of view, far less water is wasted each time a hot water faucet is opened – saving an average of 12,000 gallons of water annually for a typical four-person household. Ideal for retrofit applications.

Information:

• Armstrong Astro 2 Hot Water Re-Circulating Pump Brochure
• Armstrong Astro 2 Hot Water Re-Circulating Operating Instructions
• Armstrong Astro 2 Hot Water Re-Circulating Pump Submittal Sheet
• Armstrong Astro 2 Aquastat Control Instructions

Companion Flange Kit's: 

• Armstrong 816013-841 3/4" Bronze Flange Kit
• Armstrong 816012-841 1" Bronze Flange Kit
• Armstrong 816011-841 1-1/4" Bronze Flange Kit
• Armstrong 816009-841 1-1/2" Bronze Flange Kit

Includes:

• Circulating pump
• 6 feet line cord

Problem:

Heated water cools rapidly in domestic hot water distribution pipes, even when properly insulated. When hot water is desired, the common practice is to run cooled water down the drain until hot water reaches the tap. A typical family of four can waste over 90 hours and 12,000 gallons of sanitized water per year while waiting for hot water at the tap. 

Solution:

Armstrong Astro 2 Hot Water Re-circulation systems automatically circulate water through domestic hot water distribution pipes. This helps to ensure that everyone in the household has ‘instant’ hot water at the tap when they need it, while also helping to conserve water and save water heating energy costs. Models equipped with an aquastat save even more energy. 

Technical Data:

Power connection: 6.0 ft (1.8 m) power cord, molded duplex plug with ground

Environment: Indoor use only
Max. working pressure: 150 psi (1034 kPa)
Ambient temperature: 39°f(4°c) to 104°f(40°c)
Max. water temperature: 230°f (110°c)
Low temperature switchpoint1: 85°f(29°c) ± 10%
High temperature switchpoint1: 105°f(40°c) ± 10% Clock/timer: 12 hour analog clock with am/pm indication
Timer settings: Individual mechanical toggle for each 15 minute

interval in the 24 hour cycle
Manual override: Three position slide switch; on/auto/off 

If you have questions you can also email your request to us at: Sales@NationalPumpSupply.com

This Item Usually Ships The Same Day!